Product Details


Super Plasticiser For Low W/C Ratio Concrete


  • Flowable mix without bleeding and segregation.
  • High water reduction-upto 30%
  • High early strength
  • Improved Surface Finish, cohesion.
  • Produces flowable concrete resulting in easy placing and eliminates honeycombing. Reduction in shrinkage cracks.
  • Less permeable and hence more durable concrete.

Technical Data

  • Appearance: tight Yellow Liquid
  • Specific Gravity: 1.08 +/-0.02 at 25°C
  • Chloride Content: Nil
  • pH Value: Min 6

Method of Use

  • Dosage range of BHARATPLAST-S6001 should be 0.4 to 1.5% by weight of cementitious material. Optimum dosage should be determined by doing site trail mixes. Dosage may go above maximum limited for high performance concrete and shall be determined by site trail mix.
  • The correct quality of BHARATPLAST-S6001 should be measured with recommended dispenser and should be added to the concrete with remaining 30% mixing water and allow to mix.
  • BHARATPLAST-S6001 should not be added in dry cement under any circumstance.

Where To Use

  • Precast concrete
  • High Volume fly ash concrete
  • High performance concrete
  • Reinforced concrete


BHARATPLAST-S6001 is compatible with all types


  • Keep the liquid above freezing temperature.
  • Keep the liquid above freezing temperature.
  • If the product has frozen, thaw it at room tempera-ture (25°c) and until it completely reconstitutes in the original form.
  • Store undercover, protect from direct sunlight. Failure to comply with recommended storage condi-tion might result in premature deterioration of
  • Handling Precaution

    BHARATPLAST-S6001 is a non-toxic and inflam- BHARATPLAST-S6001 is compatible with all types mable. When in contact with the skin, it should be of cement e.q. OPC, PPC, PSC etc. washed with cold water.