Admixture

ADMIXTURES

Chemical admixtures are used to modify and improve the Properties of fresh and hardened concrete or mortar.

HIGH RANGE WATER REDUCING ADMIXTURES (HYPER PLASTICISERS) - PCE BASED

PRODUCT

  • Bharatplast S4005
    5 and 220 kg drums and bulk supply.




  • Bharatplast S46001
    5, 220 kg drums and bulk supply









  • Bharatplast S8001
    220 kg drums and bulk supply






  • Bharatplast S2193(PQC)
    220 kg drums and bulk supply.




  • Water Reducing Admixtures ( Plasticisers)
  • Bharatbuild P200D
    220 kg drum




  • Bharatbuild P500D
    220 kg drum




  • Bharatbuild SP300
    High performing water 220 kg and 250 kg drum



  • Bharatbuild SP500
    220 & 250 kg





DESCRIPTION

  • High performance PCE based admixture for wide range of concrete grades



  • Advanced low viscosity retarding super plasticiser, based on polycarboxylic technology.









  • Advanced low viscosity high performance superplasticisers, based on polycarboxylic technology. Bharatplast S-8001 complies with
    I S : 9 1 0 3 - 1999 (2007). It also complies with ASTM (494 Type G.


  • Advanced low viscosity high performance superplasticisers, based on polycarboxylic technology. Bharatplast S-2193 (PQC) complies with IS:9103-1999 (2007). It also complies with ASTM (494 Type G.


  • Water reducing admixtures.Conforms to IS:9103-99 &Complies with ASTMC494as Type A.

  • High performance slump retaining and water reducing admixtures. Complies with B g 5 0 7 5 p a r t 1 a n d ASTMC494 as Type D & 15:9103-99
  • High performing water reducing superplasticisers,Conforms to 15:9103-1999also complies with 15:2645-2003, B55075 part 3 andASTM C-494 Type F.

  • High range super plastid sing admixture. Complies with IS 9103:1999 and BS 507S Part 3,italsQconfo[ms to A5TM C-494 Typ.e F and Type ,G depending on the dosage used.

TYPICAL USES

  • Bharatplast S 4005 is a high performance retarding super p l a s t i c i s e r i n t e n d e d f o r applications where retardation and long work ability retention are required.
  • With BootstraBharatplast S-6001 is a high performance retardinq super-plasticiser intended for applic-ations where retardation and long workability retention are arequired, nd it has been dev-eloped for use in : Mass raft foundation, Pumped concrete, Concrete requiring long workability retention, High performance concrete.p
  • Bharatplast S-8001 is a very high performance super plasticiser intended for concrete of high workablity with very low water/ cement ratio. it has be developed for uses in self compacting concrete, PSC Girders pump concrete etc.
  • Bharatplast S-2193(PQC) is a high performance PCE based superplasticisers, with is intended to specialy used for major pavement quality concrete(PQC) road


  • All structural and general concrete where improved density and quality are required. Cement saving where excess cement proves necessary to obtain target strength.
  • Cement saving can be made without reduction in strength and workability. Used for all structural concrete where improved density and quality are required
  • To produce plumbaole concrete for low water cement ratio conc-rete. Easy compaction in heavily reinforced concrete bridges, foundations columns, beams and narrow farm work units
  • Speeds up construction, increases workability and cohesion, aids pymping by reducing line friction and dry packing, low porosity resulting in sustainability improved water penetration resistance.

USESDOSAGE / COVERAGE / YIELD

  • 0.5 to 2* Percent by weight of total cementitious material



  • 0.4 to 1.5 *Percent by weight of total cementitious material









  • 0.3 to 1.5* Percent by weight of total cementitious material






  • 0.3 to 1.5*Percent by weight of total cementitious material






  • 0.4 to 1.5 * percent of totalcementitious material



  • 0.4 to 1.5 * percent of total cementitious material



  • 0.5 to 2 *percent of total cementitious material




  • 0.5 to 2 *percent of total cementitious material




PRODUCT

  • Bharatbuild NC 5, 20 and 200 kg






  • Bharatbuild RB20 and 220 kg



  • Bharatbuild WB 5,20 and 220 kg






  • Bharatbuild RB 5,20 and 220 kg







DESCRIPTION

  • Chloride free accelerating admixture, complies with 15:9103-99, B$ 5075 Part 1 and ASTM (494 Type C.




  • Chemical mould release agent



  • Low viscosity wax emulsion, water based concrete curing compound. Complies to ASTM C309-90.



  • High efficiency polymeric resinbased film forming curing agent. Unicure RB give~)90%or greater curing efficien~y when tested as per BS 7542 -1992.



TYPICAL USES

  • To accelerate the setting and early strength gain of portland cement concrete and mortar. Typical application includes precast concrete sections, concrete placed in cold weather condtions and concrete repairs etc.
  • To provide quick, clean andeasy stripping of moulds andformwork and ensure highquality fair faced and stain freeconcrete.
  • Fbr spraying on freshly castconcrete, or newly exposedc o n c r e t e s u r f a c e s a f t e rremoval of form work, to forma temporary membrane whichwill retain sufficient moisturefor effective curing to take place.
  • As a spray applied membrane toretain moisture in concrete foreffective curing. Suitable for allgeneral concrete application andof particular benefit for large reaconcrete surfaces, such as airportrunways, roads and bridge works.

USESDOSAGE / COVERAGE / YIELD

  • 2 - 3 kg percent of total cementitious material




  • Bharatbuild SPL 20-60m2/litre depending on porocity & texture of mould surface

  • 3-5 m2 / kg






  • 3-5 m2 / kg







 

Subscribe

Our Newsletter